Diamond Solutions
we accept:
100% guaranteed

Wrecking Blade Turbo T-Seg

Application: Hard Materials - Granite, stone, brick, mortar.
Equipment: Angle grinder and circular saws.
Wet/Dry 10mm Segment Height.

The Ultimate in versatility for both Life and Speed.
T-seg's allow you to do something that you can't do with conventional blades. That's the ability to not only cut fast, and maintain long life, but they offer you the ability to side grind with the blade if needed. Ideal when working in mortar joints or if you wish to grind down or smooth an edge of granite or stone. T-seg's have diamond stems that go into the core to add stability and support with increased diamond concentration.

4" .080 7/8"-5/8" T4TSEGP
4.5" .080 7/8"-5/8" T45TSEGP
5" .080 7/8"-5/8" T5TSEGP
6" .080 7/8"-5/8" T6TSEGP
7" .095 DIA 7/8"-5/8" T7TSEGP
8" .095 DIA 7/8"-5/8" T8TSEGP
10" .095 7/8"-5/8" T10TSEGP
14" .125 1"-20mm T14TSEGP

Wrecking Blade The Ninja

Application: The hardest bricks, pavers, stone, reinforced concrete, refractory bricks.
Equipment: Table saws and high speed cut off saws.
Wet/Dry 10mm Segment Height.

Have you ever had a blade cut real slow, melt a brick, shoot sparks, jump out of the cut, bounce, drift, or even stop cutting? The NINJA Blade is your answer for any hard material you have either cut or will cut. No material is to hard or dense for the NINJA. Your time is money! Do not accept copies or knock offs. There is only one ninja, and we have it.

12" .125 1"-20mm T12SWG12
14" .125 1"-20mm T14SWG12
16" .125 1"-20mm T16SWG12
20" .125 1" T20SWG12

Sample Blade Tornado

Application: Granite, hard material, fast cutting.
Equipment : Angle grinder and circular saws.
Wet/Dry 9mm Segment Height.

The Blue Tornado is your best bet if your working with stone. The Blue Tornado loves bluestone, granite, lime stone, and flag stone. It can be used on any type of hard material but loves the hard stuff. A perfect blade for installers or fabricators of stone related products.

4" .080 7/8"-5/8" T4TORS
4.5" .080 7/8"-5/8" T45TORS
5" .080 7/8"-5/8" T5TORS
6" .090 DIA 7/8"-5/8" T6TORS
7" .095 DIA 7/8"-5/8" T7TORS
8" .095 7/8"-5/8" T8TORS
10" .095 7/8"-5/8" T10TORS
12" .125 1"-20mm T12TORS
14" .125 1"-20mm T14TORS